Seedburo

Cars, trucks, wagons or barge loads should be sampled with a double tube probe in five or more places. Also used for plastics, these probes are made to conform to USDA specifications. They are constructed from extra heavy gauge tubing for durable, time-tested sampling.

Open-ended probes without partitions are more convenient to empty and are widely used by the grain elevator operators for obtaining samples from truckloads. After sample is obtained, probe is held upright and sample is dumped from the handle.

All probes on this page have an outside diameter of 1-3/8″, are of double-tube construction and have a heavy bronze point (unless otherwise stated). Openings are 3-3/8″ L x 7/8″ W.

 

 

 

Partitioned Grain Probe with Wooden Handle

Partitioned grain probes are used by all grain inspectors. There is a separate compartment for each individual opening. Samples from these probes can be emptied on a grain sampling canvas.

Open-handled Grain Probe

Open-ended probes without partitions are more convenient to empty and are widely used by the grain elevator operators for obtaining samples from truck loads. After sample is obtained, probe is held upright and sample is dumped from the handle.

The openings on the inside tube rotate around so that it opens first at the bottom and then in gradual steps to the top.

This assures a fair proportion of grain samples from the bottom levels as well as from the top. The Spiral Probe is highly recommended for sampling grains when foreign material is apt to be heaviest near the bottom of a truck. The construction of the probe is a double-tube brass with a 1 3/8″ outside diameter and heavy bronze point.

39″ Stainless Steel Probes:

Have double-tube construction with 7/8″ outside diameter and 6 openings. These probes are designed for use with chemicals, corrosives, pharmaceuticals and fertilizers.

Actual dims.- 43″ x 4″ x 4″
Net wt. 2 lbs, 8oz. Ship wt. 4 lbs.

Partitioned Probe: Actual dims. – 43″ x 4″ x 4″
Net wt. 3 lbs, Ship wt. 4 lbs

Lever Yoke

The Lever Yoke uses an interlocking fulcrum principle to wrap around the outside of any probe with 1 3/8″ diameter, forming a T-handle. Each handle is 17″ long and has a hand grip.

Actual dims. 21″ x 15″ x 11″  Net wt. 10 lbs. Ship wt. 11 lbs

MTC Analyzers 2 Stage Stainless Steel Grain Probes

Dimo’s Labtronics Probes & TriersDimo’s Labtronics Aluminum Grain Probes

4ft. (41″): 8 openings, anodized aluminum – T Handle, 1 1/2″ diameter. approx. 104 cm length. Shipping weight 5 lbs.
6 ft. (69″): 10 openings, anodized aluminum – T Handle, 1 1/2″ diameter. approx. 175 cm length. Shipping Weight 7 lbs
8 ft. (2.4 m.): 14 openings, anodized aluminum – T Handle, 1 1/2″ diameter. Shipping weight 10 lbs.
10 ft. (3.1m.): 17 openings, anodized aluminum – T Handle, 1 1/2″ diameter.