Udy Mill

The Udy Mill is designed for rapid uniform grinding of a wide variety of feeds, grains, fertilizers, etc., with complete recovery of sample. The air flow provides self-cleaning action and minimum temperature rise. Cross contamination and clean-out between samples are essentially eliminated. Accessories included: 3 collection bottles with snap cap, 2 hex wrenches, antistatic solution, 0.5 mm and 1.0mm screens and clean-out brushes.

Actual dims. -10 1/3″ L x 10 1/3″ W x 18 ½” H. Ship dims. -13½” L x 13½” W x 16″ H. Net wt.28 lbs, Ship wt 33 lbs

Sample Mill Feed Controller

The Feed Controller introduces coarse sample material into the Cyclone Sample Mill. A 30 to 40 gram sample is poured into the hopper and is immediately conveyed (by a rotating screw) into the mill. Larger quantities (several pounds) may be handled by using a poly bag in place of the regular sample bottle. A 1″ diameter screw is driven by a constant speed gearmotor. The switch has both a forward and reverse rotation control and a neutral or “off” position. Feed rate is 3 grams per second. The Feed Controller is designed to fit on all UDY Mills. It can be mounted or removed readily without tools.

Mark-T Dust Collector Cabinet

Designed to confine dust internally and lower noise level. The Mark-T has a special compartment for the UDY Grinder that is lined with a full inch of sound abatement foam on all external walls and top. The foam reduces the high frequency sound waves caused by the grinding process. There are two access doors. The top door allows the operator to feed the grinder. The other allows the operator to remove the sample bottles more easily.

Mark-T dims. 18½” H x 29½” W x 16½” D. Ship wt. 75 lbs

Stein Mill

The Stein Mill is a powerful, high speed grinder extractor for lab use. The mill features a direct top drive 1/2HP motor with a speed of approximately 1500 RPM, no load. The cutter blade is machined cast aluminum. The cutter blade and shaft are easily accessible and may be washed and dried quickly without removal from the mill. The blade may be removed when re-sharpening is necessary. Also includes an automatic timer with auto cut-off safety feature. Usable Cup Capacity – grinding solids: 20cc to 500cc. Blending solids and liquids: 40cc to 400dd. Cup Size: 3-1/2″ x 3-5/8″.

Actual dims. – 19″, Ship dims. 15″ x 15″ x 22″ Ship wt. 40 lbs